Seagull B-25 Mitchell 95″ ARF SEA330

Description

Seagull B-25 Mitchell 95″ ARF SEA330

THIS KIT MUST BE COLLECTED FROM IN STORE! CANNOT BE SHIPPED DUE TO BOX SIZE!

Famed for its role in the heroic Doolittle Raid, North American’s B-25 Mitchell (so called in honour of US military aviation pioneer William ‘Billy’ Mitchell) first took to the air some two years before, in August 1940. Safe and forgiving to fly the B-25 quickly found favour with its pilots and crew not least for the fact that with an engine out, 60° banking turns were possible in the direction of the dead engine. In truth the only significant complaint was the extremely high noise level produced by its pair of Wright R-2600-92 Twin Cyclone radial piston engines, this due to the fact that the exhausts protruded from the cowl ring and, covered by a small triangular fairing, directed exhaust and noise towards the pilot and crew compartments. Exceptionally sturdy and able to withstand tremendous punishment the B-25 fulfilled its medium bomber brief exceptionally well resulting in over 9600 of the type being produced.

Of course, the popularity of the B-25, coupled with its large wing area, stable flight characteristics and practical layout – tricycle undercarriage, twin fins and inboard engine arrangement – has not been lost on Seagull. The result is this hugely desirable – dare we say, gorgeous? – 95” span ARTF that comes wrapped in authentic matt finish Oracover, complete with all the regular hardware, including fuel tanks, engine mounts, horns, linkages pilots and an electric conversion kit. High intensity LED landing lights and a plethora of scale detail (bomb doors, detailed cockpit, guns, turrets, dummy engines and a brace of beautifully moulded cowls) really do set this model apart. It’s an awful lot of ARTF for the money and one that lends itself perfectly to super-detailing and authentic weathering. If you’re a B-25 fan there is no choice, you’ll just have to have one.

Key features
Lightweight, high quality balsa and plywood construction.
Authentic B-25 (Executive Sweet) colour scheme.
Beautifully covered in genuine matt finish Oracover film.
Factory painted glass fibre engine cowls and nacelles.
Cockpit and nose detailing with lightweight painted pilots, guns and seat backs.
Plug-in wing panels simplify transportation and field assembly.
Flap equipped.
Crystal clear cockpit glazing.
LED Landing lights.
Requires a minimum 8-channel radio (12 servos).

What’s in the box
1x Factory assembled and covered fuselage.
1x Factory assembled and covered 2-piece wing set.
1x Factory assembled and covered tail set.
2x Pre-painted pilot figures.
2x Pre-painted nose gunner.
1x Pre-painted cockpit and nose detail kit.
1 x Pre-painted turret, tail, nose and fuselage gun set.
2x Factory painted glass fibre lower nacelle mouldings.
2x Factory painted glass fibre upper nacelle mouldings.
2x Factory painted dummy engine mouldings.
1x Comprehensive hardware pack (screws, horns, pushrods, fuel tanks etc.).
1x Retract door set.
2x LED wing landing lights and wiring.
1x Set of pre-painted canopy and gun turret mouldings.
1x Tubular main spar.
1x Electric flight conversion pack.
1x Comprehensive instruction manual.

Needed to complete
1x 8-channel (minimum) Tx and Rx combo.
1x Tricycle undercarriage retract set
2x Main wheels.
1x Nose wheel.
1x HS-7955TG elevator servo.
4x HS-7935MG aileron and flap servos.
3x HS-5245MG gear door servos.
2x HS-5495BH steering and bomb bay door servos.
2x HS-7245MH rudder servos.
2x 15cc i.c. engines (or electric equivalent).

Seagull B-25 Mitchell 95″ ARF SEA330

Specification

Power	Electric, Engine
Brand	Seagull
Assembly	ARTF & PNP
Aircraft Type	Scale